User's Manual

chat, you can select Resume or End.
4.7.3 Voice Mail Server
This will automatically direct incoming calls to the voice
mail centre when you cannot accept a call so that the caller can leave
a message on the voice mail system of service network. If a message
is left, you can access the message by visiting the voice mail system.
Enter “Voice Mail Server” submenu, can set two voice mail
servers at most.
Press the left soft key “Option” to enter mail option, can Edit
to enter your voice mailbox number, or Connect to Voice to
tune voice leave word.
The network operators must support the “Voice Mail Server”
function for it to be available. You may have to apply for it
before it will be activated. For details and the voice mailbox
number, please contact your network operator.
4.7.4 Broadcast Message
Broadcast message refer to public messages sent by your
network operator. If you use the broadcast message service you can
receive messages on all different subjects from your network operator
such as: the weather, taxis, hospitals, etc. Please contact your network
operator for available subjects.
When you enter the “Broadcast Message” submenu you will
see four menu options: “Receive Mode”,“Read Message”,
“Languages” and “Channel Setting”
You can read current broadcast message throught “Read
Message”.
Select the “Channel Setting”, can Add broadcast channel and
set Channel Title and Channel ID; can Select On/Off
operation to preparing broadcast channel, filtrate needless
broadcast channel; can select “Edit” to reinstall current channel;
can select “Delete” to delete broadcast channel of preparing.