GSM/GPRS/GPS Tracker GV100 User Manual TRACGV100UM001 Revision: 1.00 Quectel Wireless Solutions www.quectel.com Info@quectel.
GV100 User manual Document Title GV100 User manual Version 1.00 Date 2009-10-15 Status Initial Document Control ID TRACGV100UM001 General Notes Quectel offers this information as a service to its customers, to support application and engineering efforts that use the products designed by Quectel. The information provided is based upon requirements specifically provided to Quectel by the customers.
GV100 User manual Contents Contents ............................................................................................................................................2 0. Revision history ............................................................................................................................3 1. Introduction...................................................................................................................................4 1.1. Reference.........................
GV100 User manual 0. Revision history Revision Date Author Description of change 1.
GV100 User manual 1. Introduction The GV100 is a powerful GPS Locator designed for vehicle tracking or asserts tracking. With superior receiving sensitivity, fast TTFF (Time to First Fix) and Quad-Band GSM frequencies 850/900/1800/1900, its location can be monitored in real time or periodically tracked by a backend server or other specified terminals. The GV100 has multiple input/output interfaces which can be used for monitoring or controlling external devices.
GV100 User manual 2. Product Overview 2.1. Appearance 2.2.
GV100 User manual Steel Piece GPS Antenna GSM Antenna 12V DC power supply (Optional) USB-232 data cable (Optional) Relay (Optional) TRACGv100UM001 -6-
GV100 User manual 3. Interface Description And Installation Guide 3.1. SIM Card Interface To install the SIM card Step 1: Press the yellow button on the right side of SIM card slot to eject the SIM card holder. Step 2: Step 3: Put the SIM card on the SIM card holder. Install the SIM card holder to SIM card slot.
GV100 User manual 3.2. Antenna Interface 3.2.1. Install Antennas There are two SMA antenna connectors on GV100, one for GPS and another for GSM. Please find the GSM antenna and GSM antenna in package box. Install them to the correct SMA connector like following. 3.2.2. GPS antenna specification GPS antenna: Bandwidth: Beamwidth: Supply voltage: Polarization: Gain: Impedance: VSWR: Noise figure: TRACGv100UM001 Frequency: 1575.42MHz >5MHz >120 deg 3.
GV100 User manual 3.2.3.
GV100 User manual 3.3. Power Interface 3.3.1.
GV100 User manual 3.3.2. Power connection The input voltage range of GV100 is 8V to 32V DC and can be connected to vehicle’s battery directly (12V or 24V DC). Please install the power like following.
GV100 User manual 3.3.3. Ignition Detect The PIN 3 of power connector is Input 1 (Digital, Positive trigger). Its electrical Logical State Active Inactive conditions are: Electrical State 5.0V to 32V 0V to 3V or Open It is strongly recommended to connect this pin to ignition key to support the power saving function when the vehicle is off. Please note input 1 does not have interrupt and the recommended sample rate is 3 seconds.
GV100 User manual 3.3.4. Ignition Control The PIN 4 of power connector is Output 1 (Digital, Negative trigger). It is Open-Drain type with no internal pull-up resistor which also be used to control a relay. It means that the user has to provide a pull-up resistor or a relay coil to any positive voltage (32V max.) to detect an inactive output by voltage. It can drive a continuous current of 0.2A. The electrical conditions of it are: Logical State Electrical State Active <1.5V, max current is 0.
GV100 User manual 3.4.
GV100 User manual 3.4.1. Electrical conditions for digital inputs For negative trigger inputs the electrical conditions are: Logical State Electrical State Active 0V to 0.8V Inactive 1.7V to 32V or Open For positive trigger inputs the electrical conditions are: Logical State Electrical State Active 5.
GV100 User manual 3.4.2. Digital Input without Interrupt Input 2 and input 5 are digital inputs which do not have interrupt. The sample rate for these two digital inputs is 100ms to 25 seconds. The recommend sample rate is 3 seconds. Please note the high sample rate will also result in high power consumption. Input 2 is positive trigger and Input 5 is negative trigger. 3.4.3. Digital Input with Interrupt Input 3 and input 4 are digital inputs which have interrupt.
GV100 User manual 3.4.5. Digital Output The outputs are Open-Drain type with no internal pull-up resistor which also be used to control a relay. It means that the user has to provide a pull-up resistor or a relay coil to any positive voltage (32V max.) to detect an inactive output by voltage. Each output can drive a continuous current of 0.2A. The electrical conditions are: Logical State Electrical State Active <1.5V, max current is 0.
GV100 User manual 3.4.6. Digital Output with Built-in Relay The build in relay output is Open-Drain type with no internal pull-up resistor. It means that the user has to provide a pull-up resistor to any positive voltage to detect an inactive output by voltage. The switch capacity of the relay contact is 60W, so it can drive a continuous current of 2A at the input voltage of 30V and 1.85A at the input voltage of 32V.
GV100 User manual 3.5. Audio Interface The audio connector is designed to connect a non-balanced hands-free audio system. It is designed to use a 2.5mm stereo plug with the following configuration, please pay attention to the common GND ,this common GND is used only for audio ground, it should not used as a power ground. The speaker interface can be connected to a 32ohm speaker or an audio amplifier which drive a louder speaker. The electret microphone is recommended.
GV100 User manual Microphone input characteristics Parameter Min Typ Max Unit Working Voltage 1.0 200 1.5 2.0 500 V uA k Ohm Max Unit Working Current 2.2 External Microphone Load Resistance Speaker output characteristics Parameter Speaker Resistance Speaker level load output Maxim driving current limit of speaker TRACGv100UM001 Min Typ 16 32 0 Ohm 2.
GV100 User manual 3.6. RS232 Interface An RS232 interface has been implemented on GV100 and it can be used to configure the runtime parameters of GV100.
GV100 User manual 3.7. Fasten The Device Please use the steel piece and screw to fasten the device.
GV100 User manual 4. Compliance This transmitter is using outdoor antennas that operate at 20cm or more from nearby persons.
GV100 User manual TRACGv100UM001 - 24 -
Shanghai Quectel Wireless Solutions Co., Ltd. Room 801, Building E, No.1618, Yishan Road, Shanghai, China 201103 Tel: +86 21 5108 2965 Mail: info@quectel.
