User's Manual

EVB User Guide
15 RESERVE
16 AADET_N I Active antenna open-circuit detection
17 V_ANT I Antenna bias voltage
18 VCC_RF O Output voltage for RF section
19 GND
20 GND
Figure 11: Test points X102
Table 8: Pins of X102
Pin Signal I/O Description
1 GND Ground
2 GND
3 AOK O Antenna status report
4 V_BCKP I Backup voltage supply
5 RESET_N I System reset, low level active.
6 VCC_OUT O
Output voltage. VCC_OUT pin is
directly connected to VCC pin within
L10_EVB_UGD_V1.00 - 16 -
Quectel