User guide

Ultrasonic Fuel Sensor User Guide
ACCEUF100UG001 - 21 -
5. System Connection
System connection includes correct wiring and installation of the signal control box.
5.1. Wiring
 Wire along the vehicle frame for future maintenance.
 Don't affect the vehicle's functions of dump bucket and vehicle head maintenance.
 The detector and the extension wire should be wrapped with tape for the purpose of water
resistance, and fix them on the stainless steel hose clamp with plastic cable ties. Please refer
to Figure 17.
Figure 17. Wiring
 The extension wire should have at least 20cm distance from the heating and movable parts.
 The extension wire should be fastened every 50cm with cable ties and trim the unwanted
parts with the diagonal cutting pliers.
 The extension wire should not be tripped over by any movable part.
Queclink
Confidential