User guide

Ultrasonic Fuel Sensor User Guide
ACCEUF100UG001 - 12 -
4. Installation
This chapter deals with the installation procedure of the square and round fuel tank.
4.1. Installation of Square Fuel Tank
4.1.1. Preparation
Fill up the fuel tank and park the vehicle on a horizontal surface, and prepare all the installation tools
and auxiliary materials as shown below.
Table 2: Tools and Auxiliary Materials
Items Quantity Items Quantity
Ultrasonic Fuel Sensor 1 set Small Phillips Screwdriver 1
Couplant 1 bottle Large Phillips Screwdriver 1
LOCTITE 380 Glue 1 bottle Cable Tie Several
80# Sandpaper Several LED Digital Tube Display 1
Diagonal Cutting Pliers 1 Rag 1 piece
Black Tape 1 Plastic Bottle with Water 1 bottle
12V Lithium Portable
Power Supply
1 Disposable Mitten Several
L-Square 1 3m Line Tape 1
Chalk Several 304 Stainless Steel Hose Clamp Several
Thread Sealant 1 bottle
4.1.2. Observe Fuel Tank Surface
Observe the locations of the obstacles such as the fuel sending unit, supply tube and return tube on
the surface of the fuel tank.
Figure 4. Surface of Square Fuel Tank
Users can judge the locations and structures of the obstacles inside the fuel tank by observing them
Queclink
Confidential