Specifications

GV200 @Track Air Interface Protocol
TRACGV200AN003 – 7 –
specified command configuration of the terminal.
2. Add <format protocol> in SRI of GTALL.
3. modified the length of <Device Name
> to 20
bytes.
4.09 2012-9-5
Eric Xu
Add <ERI Mask> to command AT+GTFRI to
configure whether to report
the data from
peripherals by +RESP:GTERI.
Add <ERI Mask> to +RESP:GTALL
for the
customers to get the relevant set information.
3) Add +RESP:GTERI
message to extend the
message +RESP:GTFRI.
4) Add new command AT+GTEFS
to configure
the extend digit fuel sensor.
5) Add a mode to the parameter <Working Mode>
and add the parameter <Digit Fuel Sensor Type>
in the command AT+GTURT and the message
+RESP:GTALL
6) Add new command AT+GTACD
to configure
the AC100 devices, including I-
button and
temperature sensors.
7) Add new command AT+GTIDA
to protect
against unauthorized use.
8) Add AT+GTIDA function in the HEX.
9) Add FRI mode5 function.
10) Add AT+GTFLA function in the HEX.
11) Add +RSP:GTGSV report message..
1) Add +RSP:GTERI report message in hex..
4.10 2012-11-08
Eric Xu
1）Add new command AT+GTPDS
to support
preserving special device logical state。
2） Modify the description of parameter <Mask
>
in command “AT+GTPDS”。
3） Delete the command mode 3 in “AT+GTPDS”
。
4） Add <length> parameter before the <data> in
the HEX rmessage of +RESP:GTDAT reporting.
5) Add “ERI” in the <Fix Type
> of the
+RESP:GTGSM(HEX). add “auto online mode” in
the <Sleep Enable> of the AT+GTURT.
4.11 2012-11-30 Eric Xu 1) Add configuration command in the <Single
Configuration Command | Configuration
Mask> of AT +GTRTO
and report
+RESP:GTALC
message by set configuration
command.
2) Add Jamming Behavior Function.
3) Add “RJB”
Value control Jamming behavior
Queclink
Confidential