Specifications

GV200 @Track Air Interface Protocol
TRACGV200AN003 – 44 –
3.2.13. Speed Alarm
This command is used to set a speed-alarm range for the terminal. According to the working mode,
the terminal will report message +RESP:GTSPD to the backend server when its moving speed is
outside or inside of the range.
 AT+GTSPD=
Example:
AT+GTSPD=gv200,1,80,120,60,300,1,1,0,0,,,,,,,,,,,,000C$
AT+GTSPD=gv200,2,80,120,60,300,1,1,0,0,,,,,,,,,,,,000C$
Parameter Length(byte) Range/Format Default
Password 4 – 6 '0' – '9' 'a' – 'z' 'A' – 'Z' gv200
Mode 1 0|1|2|3|4 0
Min Speed <=3 0 – 400km/h 0
Max Speed <=3 0 – 400km/h 0
Validity <=4 0 – 3600sec 60
Send Interval <=4 0 | 30 – 3600sec 300
Output ID 1 0 – 4 0
Output Status 1 0|1
Duration <=3 0 – 255(×100ms) 0
Toggle Times <=3 0 – 255 0
Alarm Start Mode 1 0|1 0
Geo ID Mask 8 00000000-0000001F
0
Reserved 0
Reserved 0
Reserved 0
Polygon ID Mask 8 00000000-01FFFFFF
Reserved 0
Reserved 0
Reserved 0
Reserved 0
Reserved 0
Serial Number 4 0000 – FFFF
Queclink
Confidential