Specifications

GV200 @Track Air Interface Protocol
TRACGV200AN003 – 38 –
3.2.11. Fixed Report Information
The command AT+GTFRI is used to configure the parameters of scheduled report
(+RESP:GTFRI).
 AT+GTFRI=
Example:
AT+GTFRI=gv200,0,,,,,,,,,,,,,,,000A$
AT+GTFRI=gv200,1,1,0,1,1000,2300,180,30,,,21,,600,,,000A$
AT+GTFRI=gv200,2,1,0,1,1000,2300,,,500,,31,,,,,000A$
AT+GTFRI=gv200,3,1,0,1,1000,2300,,,,1000,0,,,,,000A$
AT+GTFRI=gv200,4,1,0,1,1000,2300,,60,,300,0,,,,,000A$
AT+GTFRI=gv200,5,1,0,1,1000,2300,,60,,300,0,,,,,000A$
Parameter Length(byte) Range/Format Default
Password 4 – 6 '0' – '9' 'a' – 'z' 'A' – 'Z' gv200
Mode 1 0 – 5 0
Discard No Fix <=2 0|1 1
Max Send <=5 0 – 65535 0
Period Enable 1 0|1 1
Start Time 4 HHMM 0000
End Time 4 HHMM 0000
Check Interval <=5 30 – 86400sec 180
Send Interval <=5 5 – 86400sec 30
Distance <=5 50 – 65535m 1000
Mileage <=5 50 – 65535m 1000
Report Mask <=4 0000 – FFFF 3F
Corner Report <=3 0 – 180 0
IGF Report Interval <=5 0|5-86400sec 600
ERI Mask 8 00000000 – FFFFFFFF 00000000
Reserved 0
Serial Number 4 0000 – FFFF
Tail Character 1 $ $
 <Mode>: The working mode of the fixed report.
 0: Disable this function.
Queclink
Confidential