User's Manual

GV65 User manual
TRACGV65UM001 - 12 -
Placethecoveronthebottominthepositionasshowninthefigureabove.Pressthefrontcase
andthebackcaseuntilitsnaps.
Openthecaseandensuretheunitisnotpowered(unplugthe10Pincable).Slidetheholderright
toopentheSIMcard.InserttheSIMcardintotheholderasshownbelowwiththegold‐colore
d
contactareafacingdown.Takecaretoalignthecutmark.ClosetheSIMcardholder.Closethe
case.
Figure4. SIMCardInstallation
4.3. InstallaSIMCard
4.4. Power Connection
VIN (PIN1)/GND (PIN2) are the power input pins. The input voltage range for this
device is from 8V to 32V. The device is designed to be installed in vehicles that operate on
12V or 24V systems without the need for external transformers.