User's Guide

GPScanID 100 User Operational Manual
Page 6 of 37
4. Reader assembly and initial Set Up
4.1 Assemble and charge the Reader
Step 1: Connect a Detachable Antenna to the Reader
Take the reader by the handle.
Twist the locking collar in an anti-clockwise motion until
it is completely unthreaded.
Remove the locking collar from the Reader.
Take a Detachable Antenna and push the connector end
of the antenna onto the connector end of the Reader.
Slide the Locking Collar over the end of the Detachable
Antenna.
Fasten the locking collar back into place on the reader by
turning it clockwise until firm (do not overtighten).
The Reader is now ready to charge before turning on.