User's Guide

GPScanID 100 User Operational Manual
Page 31 of 37
Continuous mode will allow you to read multiple tags once the Read button
is pressed. It stops when the Read button is pressed again. The reader beeps
continuously when reading starts. It beeps twice quickly when a tag is read.
Auto mode will allow you to read tag one at a time by pressing the Read
button or continuously read tags by pressing and holding the Read button for
more than 1 second. When reading tags continuously, the reader beeps
continuously and will issue 2 quick beeps if a tag is read. Reading stops when
the Read button is pressed again.
Preference Allows you to adjust reader settings such as display brightness, turn LED
indicators on / off, turn vibrate on / off, turn sound on / off and turn Auto off
on / off (Auto off allows the reader to turn off after a certain period of
inactivity).
Restore Allows you to restore the reader to the original factory settings. All recorded
Sessions and IDs will not be deleted and will remain on the reader.
Connection Use this menu to set up connection parameters with different peripheral
devices, including the baud rate. Baud rate is the speed of transmission of
data between connected devices.
Info Shows the current settings of the reader.
6.5 Bluetooth Menu
The Bluetooth menu allows the user to modify the settings and operate on the Bluetooth®
function in the reader.
On/Off Turns the Bluetooth function on / off on the reader.
Search… Allows you to search for Bluetooth-enabled peripheral devices in
proximity to the reader.
Cancel Pairing Allows you to disconnect the current connected Bluetooth peripheral
device.
Connect Shows a list of peripheral Bluetooth device connections previously
established with the reader for you to connect to quickly.
Delete Connection Shows a list of previously established Bluetooth device connections. You
can delete previous connections individually or you can delete all previous
peripheral devices at once.
About Shows information about the current Bluetooth connection.