User's Guide

GPScanID 100 User Operational Manual
Page 10 of 37
How to set up the Reader Name
The reader name is used to identify the reader during Bluetooth and WiFi connections (note
WiFi connections are not yet enabled but this feature will be available in the future).
If the Name setting is not highlighted, use the / Keys to navigate to the Name setting in
the Date/Time Menu then press the  key or MENU/OK button to select.
The Reader Name prompt screen will appear.
Use the  Keys to navigate between the rows and to the first character of the reader
name then press the MENU/OK button to select. Repeat for each character of the name. Use
the and buttons to toggle between the alpha and numeric symbol input screens.
Note: Names can be up to a maximum of 8 alpha-numeric digits.
To delete a character, navigate to DEL using the  Keys and press the MENU/OK
button to delete a single character. Repeat to remove more characters if needed.
To exit the name set-up at any time, navigate to EXIT using the  Keys and press
MENU/OK button to exit to the previous screen.
After the reader name is entered, navigate to SAVE using the  Keys and press the
MENU/OK button. The following confirmation screen will display the reader name.
Press the MENU/OK button to select OK and exit.