User's Manual

GL100S User Manual
TRACGL100SUM001 -8-

Method 1: Press the Power key at least 3 seconds and release it to turn on GL100S. At
the same time, PWR LED will light on.
z Turn off:

Method 1: Press the power key about 2 seconds; PWR LED will fast flash and then turn
off, it indicates that GL100S is turned off. The time of p ower off i s depended on the
quality of network. The maximum time of power off is 90 seconds. It is only valid t o
turn off when using internal battery. Please note the end-user can not power off
GL100S when the power key is disabled by protocol.
Note: Before power off one location message need to be send. When in a place the GSM signal
is weak or no GSM network, the equipment will try 90s to send the message. After 90s, it
will power off immediately.