User's Manual

GL100M User manual
TRACGL100MUM001 - 6 -
Long press the key to active SOS alarm
Mini USB interface Plug in the AC-DC power adapter to this
interface for charging battery.
2.3. Two Triple-Color LEDs Description
There are two triple-color LEDs in GL100M. Each LED shows red, green and blue to indicate
different state of GL100M. For better understanding, we call them Red LED 1, Green LED 1,
Blue LED 1 and Red LED 2, Green LED 2, Blue LED 2.
Light Color event State
The power key has been pressed light, It will be off after the key released.
The device receives a valid
command
light
When power on the terminal light for about 2 seconds
Red
When power off the terminal slow flash(about 2s once) until the terminal
is off.
network searching fast flash
network has been registered slow flash
Green
SIM pin locked ever-light
GPS is in fixing fast flash
LED1
Blue
GPS has fixed ever-light for about 4 seconds
The device is in charging fast flash Red
When the battery in low status slow flash(about 2s)
charging has completed ever-light Green
After inserting the charger light for 4 seconds to indicate the battery
status is checked
LED2
Blue The function key has been
pressed
The blue led2 will be light when the function
key is pressed. It will be off after the function
key released or the corresponding event
(SOS event or Gen-Fence 0 switch)
generated because of the key pressed for 3
seconds.