Operation Manual

Qucell 4G/LTE Small Cell System Manual Version: 0.0.3
Qucell Confidential 28 2018-08-29
Figure 20-2. Sync Source Setting
4. Click ‘OK’ button in the popup window or ‘Reboot’ button on the header.
Figure 20-3. popup window1
5. If changing target parameter needs reboot, system will popup window below. Click ‘OK’ button and femto
will reboot.
Figure 20-4. popup window2
5.4.2. Reboot
You can run ‘Reboot’ using Operator UI.
- Change Boot Side and Reboot
1. Click ‘Firmware Update’ button on the menu.