2.
Package Contents • Transmitter x 1 • Receiver x 1 • Base stand x 2 • Audio/Video cable x 2 • Power adaptors (DC6V) x 2 • User manual x 1 Note: The transmitter and the receiver look very similar. You can find “transmitter” and “receiver” labels on the side of the units. See Fig. 1. Fig. 1 Receiver Transmitter Receiver Transmitter Product Layout Transmitter/Receiver (See Fig. 2 and Fig. 3) 1. Power/Channel Indicator 2.
Fig. 2 1 Receiver/Transmitter 2 Fig. 3 3 3 4 4 5 5 6 6 7 7 Transmitter Receiver Setting Up Before you make the connection: • Set the channel by pressing the select button on the front of the transmitter and the receiver to the same channel. 1. Setting up the Transmitter 1.
Fig. 4 A/V Cable OUT VIDEO AUDIO Transmitter Satellite receiver/DVD/VCD Note 1: If the A/V equipment has only one output for audio (mono sound only), connect the white plug to that single audio output jack. 1.2 Power Supply a. Plug one end of the provided power adaptor into a wall outlet and the other end into the rear of the transmitter. See Fig. 5. b. Turn on the transmitter. light up. The LED on the front of the unit should Fig. 5 POWER ON-OFF Wall Outlet Transmitter 2.
2.1 Connect the Receiver to a TV A/V Connect – for TV with A/V Input Jacks Connect the mini-plug of the provided A/V cables to the A/V jack on the rear of the receiver; connect the other end of the cable to the A/V jacks on the TV labeled AUDIO/VIDEO IN. See Fig. 6. Fig.
Note 1: Connect the yellow plug to the jack labeled VIDEO, the red plug to the jack labeled AUDIO RIGHT and the white plug to the jack labeled AUDIO LEFT. Note 2: If the TV has only one input for audio (mono sound only), connect the white plug to that single audio in jack. 2.2 Power Supply a. Plug one end of the provided power adaptor into a wall outlet and the other end into the rear of the receiver. See Fig. 8. b. Turn on the receiver. The LED on the front of the unit should light up. Fig.
Specifications Transmitter/Receiver A/V Transmitting Frequency A/V Signal Range Antenna Channel Audio Video Dimensions Weight Power 2.4GHz 100 meters (300 feet) clear line of sight Built-in antenna 4 selectable channels Stereo audio input and output Composite input and output 12.5 x 8 x 2.
• If there is a microwave oven in use in the path between the transmitter and receiver, remove the microwave oven or turn it off. • Make sure the transmitter and receiver are within range of each other (range of approximately 300 feet; 100 meters in a clear line of sight). Care and Maintenance • Keep all its parts and accessories out of the reach of young children. • Do not attempt to open the case. Non-expert handling of the device may damage it. • Keep dry.
