User`s manual

Quatech CompactFlash Card User’s Manual SSCF-200/300

- 6 -

5. Hardware Specification

5.1 PINOUT

The SSCF-200/300 is supplied with a 300mm long Type 46 cable that terminates with a DB9 Male

connector with female screwlocks (to match the port at the back of a PC)

The pin-out below applies to both the SSCF-200/300 card and the DB9 male connector on the

supplied cable (the cable is pinned one-to-one).

PIN NAME FUNCTION

1* RXD- Receive Data inverting input

2 RXD+ Receive Data non-inverting input

3 TXD- Transmit Data inverting output

4 TXD+ Transmit Data non-inverting output

5 GND GROUND

6 CTS- Clear To Send inverting input

7 RTS- Request To Send inverting output

8 CTS+ Clear To Send non-inverting input

9 RTS+ Request To Send non-inverting output

For ref: mating connector type: Honda rmc-e9f2s-bsla2n-a2

*Pin 1 is nearest the edge of the card.

Baud multiplier switch

PIN 9 PIN 1