Technical data

JSC 36381 MARCH 30, 2000
Baseline
F-4
_____ Select Clients for Microsoft networks for the primary network logon.
_____ Under the ‘File and Print Sharing’ button, select the appropriate/required
settings.
_____ Sel OK and reboot.
10.
NOTE
CONTACT SSC OFFICE FOR YOUR NETWORK PARAMETERS
In Network Properties, configure your Win95 load network component ‘Client
for MS Networks’ to ‘Logon to WinNT domain’, Domain = _________. Also set
‘Quick logon’ as the logon option.
_____ Select Network Neighborhood | properties.
_____ Select Clients for MS Networks | properties.
_____ Enable ‘Log on to Windows NT domain’ checkbox.
_____ Enter the Domain in the Win NT domain field.
_____ Enable Quick logon radio button under Network Logon option.
_____ Sel OK and reboot.
11.
NOTE
CONTACT SSC OFFICE FOR YOUR NETWORK PARAMETERS.
In Network Properties, set the following parameters:
_____ Select the identification tab and set:
Computername = ____________
Workgroup = _______________
_____ Under the ‘Access Control’ tab, select the ‘User Level access control’ radio
button and enter the Domain name (see Step 8) in the ‘Obtain list of users
and groups from:’ field.
NOTE
YOU WILL BE PROMPTED FOR AUTHENTICATOR TYPE IF NOT CONNECTED
TO THE SSC FILE SERVER. SELECT “WINDOWS NT DOMAIN” AS THE
AUTHENTICATOR; ALSO, REMEMBER TO KEEP THE EXISTING VERSION OF
SECURE32.DLL FILE.
12. Verify with the OPS LAN ICD the necessary settings for the TCP/IP properties
for Proxim RangeLAN2 7400 PC Card Adapter: