Technical data

JSC 36381 MARCH 30, 2000
Baseline
F-2
NOTE
DO NOT EJECT FLOPPY DISK, PRESS ANY UNNECESSARY BUTTONS, OR
DISCONNECT POWER SUPPLY DURING COURSE OF PROGRAM.
_____ Boot laptop from the AutoLoader floppy disk and allow program to
execute.
_____ Select Option 2 (“Configure CMOS settings for SSC Client, PCS, MPSD, or
CPSD”)
_____ Allow program to execute.
_____ AutoLoader Reconfiguration Summary
_____ _ for message “Current CMOS Configuration valid for: SSC Client, PCS,
MPSD or CPSD.”. If not present, contact SSC Office for assistance.
_____ Eject floppy disk and reboot.
5. Install unique customer software, as required.
The following steps are to be complete after the OPS LAN customer’s unique hard
drive software loading.
6. Load Proxim RF network card drivers using the following steps:
_____ Use Range LAN2, Win95/NT, P/N 9450.0132 Rev. B floppy disk supplied
by SSC office.
_____ Insert Range LAN2 card (with proper Security ID already set) in socket, let
Win95 detect new hardware.
_____ Let Update Device Driver Wizard search local drives for most current
driver for PROXIM-LAN PC CARD, hit ‘Next’ button to start search for
drivers, hit ‘Finish’ after found
_____ Insert disk labeled ‘Proxim RangeLAN2 required’, dialog appears, just hit
‘OK’
_____ Copying Files …’ dialog, select A:
⇒ Windows builds driver info database
⇒ Keep existing version of SECUR32.DLL (MS Win32 Security Services).
⇒ At the “could not find RL2API.INF on Win95 CD-ROM” message,
select A:\.
⇒ Manually shut down/restart Windows with network card inserted and
floppy disk removed.