Technical data

JSC 36381 MARCH 30, 2000
Baseline
A-6
A.8 SanDisk PC Card II ATA (85MB)
Power Requirements
DC Input Voltage, Commercial 3.3V ± 5%, 5V ± 10%
Typical Power Dissipation Sleep 200 µA (3.3V) 500 µA (5V)
Read 32-45 mA (3.3V) 46-75 mA (5V)
Write 32-60 mA (3.3V) 46-90 mA (5V)
Temperature
Operating 0 - 60°C
Non-Operating -25 – 85°C
A.9 Adaptec 1460 SCSI Interface
Image n/a
Data Transfer Rates Up to 2 MByte/sec PC Card bus rate
Up to 10 MByte/sec synchronous burst rate on SCSI bus
Capacity Up to 7 daisy-chained SCSI devices
Cable Options 50-pin High-Density (SCSI-2)
50-pin Low-Density (SCSI-1)
DB-25-pin cable offer in kit
Power Consumption .3 W typical
.2 W standby mode
Size PC Card Type II
SCSI Data Format 8-bit with automatic parity generation
Termination Power Internal active termination provided
A.10 Epson Stylus 800 Color Printer
The Color Printer Subsystem (CPS) will consist of the following components:
• Epson Stylus Color 800 printer, with power interface modified for 120 VDC
• Zero gravity paper handling input and output trays
• Parallel data cable
• Epson Type B Multiprotocol Ethernet Card (Epson P/N C823572)
• Ethernet 10Base2 cable
• US segment 120 VDC
• External power supply to convert 28 to 120 VDC in the Russian segments
• Printer Ink usage constraints include:
♦ Once ink cartridges are installed, the printer must be stored with ink cartridges to prevent clogging.
♦ Printers must be used every two months ot the ink will dry Ink life is 2 years from production date.