User`s manual

Windows NT
5-1
5 Windows NT
5.1Installing SSP-100
To allow easy configuration of the SSP-100 the Quatech Device Manager for Windows
NT has been written for the hardware. This configuration utility supports the SSP-100
only in block addressing mode.
To begin the installation, open Windows Explorer and search for the
Setup.exe
command to install the Quatech Device Manager. <See following Windows Explorer
figure.> (D:\Serial Port Adapters\Drivers\Windows NT 4.0 for PCI, PCMCIA,ISA).
Once the installation is complete an icon will be placed on the desktop.
Windows NT Explorer