Specifications

Table 3–16 lists the options for the status command.
Table 3–16 Status Command Options
Command Description
St[atus] Display status of all tests.
St[atus] COM[/n] Display status of COMM port(s) under test.
St[atus] devices Display status of currently running devices.
St[atus] Ethernet/n
1
Display status of an Ethernet device.
St[atus] network/n
1
Display network table for an Ethernet device.
St[atus] t Display status of specified test.
St[atus] t-t Display a range of tests that begins with the first test
number specified and ends with the second test number
specified.
1
Device slot number.
3.9.20 Time
The time command lets you display the current date and time and also the
elapsed time since the start of testing.
Format: TIME
RUN> time
Enter
03/01/92 15:00:08 applicationDEC System Exerciser Rev 4.0 400xP 0000:07:32
3.9.21 Unblock
The unblock command lets you resume a test that was prevented from
running by the block command.
Format: UNBLOCK [argument_list]
Table 3–17 describes the options that can be used with the unblock
command.
Table 3–17 Unblock Command Options
Command Description
U[nblock] Display tests that are currently unblocked.
U[nblock] t Unblock the specified test.
U[nblock] t-t Unblock a range of tests that begins with the first test number
specified and ends with the second test number specified.
System Exerciser 3–25