Specifications

Table 2–2 (Cont.) POST and Boot Messages
POST No. Error Name Description Solution
003 Hard drive read failure The hard disk
drive has failed.
Check the system
configuration and
drive type by
running the SCU.
Check both ends
of the controller’s
cables, and reseat
the hard disk
controller board.
Try another hard
disk drive. If the
problem persists,
replace the hard
disk controller.
002 No boot device available If booting from a
diskette, it is a
nonbootable type
or the diskette
drive has failed.
If booting from a
hard disk drive,
it might not be
formatted or the
drive might have
failed. The problem
might also be the
SCSI controller
board. Make sure
the diskette in
drive A contains an
operating system.
If applicable, make
sure the hard disk
drive contains an
operating system.
(continued on next page)
System Troubleshooting 2–15