Specifications

2
System Troubleshooting
2.1 Introduction
This chapter describes troubleshooting of the applicationDEC 400xP system. It
contains the following sections:
• Diagnostic tools
• Power-on self-test
• Setup utility
• Run-time error messages
• Troubleshooting
2.2 Diagnostic Tools
Table 2–1 lists the diagnostic tools required to service the applicationDEC 400xP
system.
Table 2–1 Diagnostic Tools
Tool Part Number Description
System Configuration Utility
Diskette (APPLICATIONDEC
400 XP SYS 2.0)
AK-PNHPA-CA This utility is used to
reconfigure the system when
options are installed.
Library Diskette (LIBRARY
DISK OF ISA CFG FILES)
AK-PLADB-CA Library of ISA configuration
files used to reconfigure the
system when ISA options are
installed.
applicationDEC System
Exerciser diagnostics diskette
(APPLICATIONDEC SYSX 4.0)
AK-PGF7D-CA Standalone system diagnostic
diskette. (See Chapter 3).
Loopback, 9-pin serial port FD-10164-00 External loopback test
connector.
System Troubleshooting 2–1