Specifications

1.3.3 Memory Expansion Module
The memory expansion module:
• Allows for increased memory beyond the 64 MB of memory that can be
installed on the system board
• Is installed in a slot on the system board
• Contains 8 SIMM slots
• Accepts 2, 4, 8, and 16 MB SIMMs
If 16 MB SIMMs are installed on the memory expansion module, an additional
128 MB of memory is provided. Combined with the maximum possible 64 MB
available on the system board, 192 MB of memory is available.
All of the memory logic is designed for future support of 32 MB SIMMs. When
32 MB SIMMs are available, the total possible memory will be 384 MB.
1.4 Power Supply
In the lower area of the cabinet is the system power supply. The supply
provides 350 W to the system cabinet and autosenses input power. This means
the cabinet can be connected to 110/120 V or 220/240 V, 50 or 60 Hz, without
making any mechanical settings.
1.5 Disk Storage and Media Options
The system board supports IDE drives directly. An IDE drive connector on the
board allows connection of up to two 105 MB half-height IDE drives.
By installing a SCSI adapter in an EISA expansion slot, greater expansion is
possible. A SCSI bus can have up to seven SCSI devices. The system enclosure
has seven half-height expansion bays. These are convertible to full-height
bays. Any combination of full- and half-height bays is possible. For maximum
storage, three 1.3 GB full-height SCSI drives and one 852 MB half-height drive
can be installed for a total of 4.8 GB inside the enclosure.
Three of the seven half-height storage bays are accessible. These bays are
directly below the standard 3.5-inch 1.44 MB diskette drive in the front of the
enclosure. These bays can be used for the installation of SCSI half-height or
full-height tape drives, if desired.
1–12 System Overview