Specifications

In manual verification mode, the SCU will not identify resource conflicts until
you select the "Verify" option during the "View or edit details" menu. The
"Verify" option does not appear unless you are in manual verification mode.
Automatic configuration can be disabled for individual modules. By "locking"
a board, you prevent the SCU from automatically changing the module’s
resources, or suggesting a change. To lock a module:
1. Select the advanced configuration screen from the "View or edit details"
menu by pressing
F7
. A submenu is displayed.
2. Highlight the "Lock/unlock boards" item.
3. The list of slots with the modules installed is displayed. Use the arrow
keys to select the module whose resources you do not want to change.
4. Press
Enter
to lock the board.
In all displays of the system, locked boards are designated with an exclamation
mark (!).
5.7 Viewing Total System Configuration
To view a list of all used and available system resources, select the "View or
edit details" screen. Press
F7
during this display. A secondary menu appears
with "View additional system information" as an option. Select this choice by
highlighting it and pressing
Enter
. You then have a choice of viewing all used
system resources, or all available resources. This is a very useful feature.
Note
The available system amperage resource is for future use. Any number
displayed in this resource should not be relied upon since not all ISA
CFG files contain information about the amperage used by the board.
System Configuration 5–21