Specifications

To delete the power-on password, type the following string at the password
prompt:
Current password/
5.3.2 Configure Computer
If you are accessing this menu item for the first time, it is recommended that
you follow the menu items listed below in order. If this is a subsequent session,
refer to the appropriate menu item to update the system configuration.
1. Important EISA configuration information
2. Add or remove boards
3. View or edit details (Setup)
4. Examine required switches
5. Save and exit
5.3.3 Important EISA Configuration Information
This menu item provides basic EISA configuration information on seven
screens. These screens are available at any time during the configuration
process by pressing
F1
and selecting "EISA configuration" from the help menu.
5.3.4 Adding or Removing Boards
This menu item allows you to add or delete ISA expansion boards. This
menu item also allows you to display the location of the system board and all
expansion boards installed in the system.
Note
The SCU automatically detects any EISA expansion board installed
in the system. The SCU does not automatically detect ISA expansion
boards.
The SCU automatically detects EISA modules, but you must load an EISA
CFG file to configure an EISA module. If the EISA CFG file is already on the
System Configuration Diskette, the SCU loads it automatically.
5–10 System Configuration