Specifications

6. Using the "Copy System Configuration Diskette" option, make a backup
copy of the original System Configuration Diskette. Two copy options are
available:
a. Copy diskette from diskette drive A to diskette drive A
b. Copy diskette from drive A to diskette drive B
Note
Always copy from diskette drive A to diskette drive A. Drive B is a
1.2 MB 5.25-inch diskette drive.
Follow the prompts on the monitor screen to back up the System
Configuration Diskette. You will have to swap diskettes several times
to copy the entire diskette.
7. Using the "Maintain System Configuration Diskette" option, copy the CFG
files supplied with any EISA or ISA expansion board.
8. Select "Learn about configuring your computer" to familiarize yourself with
the SCU.
9. Set the current computer time and date using the "Set time" and "Set date"
menu items.
10. Select the "Configure computer" option to configure the system. Refer to
Section 5.3.2 for further information.
Note
If the message "Unable to update configuration information in FLASH
memory" appears on the monitor screen while you are accessing the
"Configure computer" option, make sure the FLASH memory jumper
is set correctly before you continue. The FLASH memory jumper is
jumper E0721 and should be in the 1–2 position.
11. Select the "Maintain System Configuration Diskette" option to create,
change, or update SCI or CFG files.
12. Select the "Access password utility" option to set system and network
passwords and lock the keyboard.
5–8 System Configuration