User`s manual

Status Value: 08
I/O range 3e8-3ef, 8-bit
Assigned IRQ is 5 (enabled)
The above example is configured for COM 3 and IRQ 5.
4.5.2 Fax/Modem Cards Under Windows 95
The Card and Socket Services installed in Windows 95 will be able to work with a Fax/Modem
card. The manufacturer’s documentation should provide any additional information on how to
install the card in a Windows 95 environment.
4.5.3 Fax/Modem Cards Under OS/2 Warp
When Card and Socket Services was installed, support for Fax/Modem cards was enabled by
default at the "Selective Install" window. Unless this was turned off during the initial installation
process, OS/2 Card and Socket Services should be ready to provide Fax/Modem card support.
If the support was turned off during the installation process, simply follow these instructions to
install support for Fax/Modem cards:
1. Double click on the "OS/2 System" icon.
2. Double click on the "System Setup" icon.
3. Users of OS/2 Warp version 4.00 must double click the "Install/Remove" folder and
then select "Selective Install". Users of OS/2 Warp version 3.00 and before can
double click on the "Selective Install" icon.
4. Click on the icon labeled "PCMCIA Support". Click on the box labeled "Fax/Modem
Cards". Select "OK"
5. When prompted, insert the OS/2 Installation CD or diskette. Be certain that the
proper path has been selected, and press <ENTER>.
6. A shutdown and re-start of OS/2 Warp will be required. Once the system and OS/2
have been re-started, Fax/Modem cards may be used.
PCD2-F User’s Manual 15