User`s manual

Quatech SDS User’s Manual Installing the device drivers
April 2008 940-0183-155 Page 39
Figure 36 - Describe the Remote Subnet screen
Step Procedure Description
 Step 46 Locate the target subnet’s default
gateway address.
You can get this address from a device
already on the target subnet. Your
system administrator should also be
able to provide this information.
 Step 47 Enter the target subnet’s default gateway
address in the space provided.
Press Next to continue.
The Wizard initiates a search of the
specified target subnet.
The Search network for Serial Device
Servers screen displays.
Go to □ Step 10.
Figure 37 explains how to
gather the information you
need to search for your SDS on
a remote subnet.