User`s manual

Quatech SDS User’s Manual Introduction
April 2008 940-0183-155 Page 7
Getting started
Unpacking your SDS
Follow these steps to unpack your SDS.
Step Procedure Description
 Step 1 Remove the SDS from the box.
 Step 2 Remove all packing material from the SDS. Save the packaging in case you ever need
to store the unit or return it to Quatech
for service.
 Step 3 Check the contents of the package to make
sure you have received everything listed
below:
¾ SDS
¾ Power cable
¾ Power source
¾ Loopback connector(s)
¾ CD-ROM containing the SDS device
drivers and configuration software
¾ Quick Start Guide
The complete SDS package ships in a
single box.
 Step 4 Check the SDS and accessories for shipping
damage.
Pay particular attention to the SDS’ case
and port connectors. If anything is
missing or damaged, contact your
Quatech sales representative.