User`s manual

6. Use the COM Port device names (COM5, COM6, etc.) to access any of the
particular serial ports on the DSP-100. This name is required by a Windows
2000 application when accessing a particular port.
4.2.2 Changing Resource Settings with Device Manager
1. Start the Windows 2000/XP Device Manager.
2. Double click on the hardware class Quatech Multiport Serial Devices to list
hardware devices in the class.
3. The DSP-100 “parent device” belongs to this hardware class. The device
name for the DSP-100 is Quatech DSP-100 PCMCIA Two-Port RS-232 Serial
Adapter.
4. Open the Properties dialog for the DSP-100 device,then click the Advanced
tab to view the clock rate settings.
Windows 2000/XP 4-7
www.bb-elec.com [e-mail] [e-mail]
International Office: 707 Dayton Road PO Box 1040 Ottawa, IL 61350 USA 815-433-5100 Fax [phone]
European Office: Westlink Commercial Park Oranmore Co. Galway Ireland [phone] Fax [phone]