User`s manual

Card and Socket Services Software:
In order to use the DSP-100 Enabler for DOS, the system MUST NOT be configured
with Card and Socket Services software. If a Card and Socket Services software is
installed, the Enabler may interfere with its operation and with the device(s) it controls.
For systems configured with Card and Socket Services, the DSP-100 Client Driver is the
recommended method of configuration.
2-11 DSP-100 (Rev. G and later) User’s Manual
www.bb-elec.com [e-mail] [e-mail]
International Office: 707 Dayton Road PO Box 1040 Ottawa, IL 61350 USA 815-433-5100 Fax [phone]
European Office: Westlink Commercial Park Oranmore Co. Galway Ireland [phone] Fax [phone]