User`s manual
Waddress specifies the base address of the memory window required to configure the
DSP-100. Set address = D0 for a memory window at segment D000, address =
D8 for a memory window at segment D800, etc. Valid settings for address
are C8, CC, D0, D4, D8, and DC. If this option is omitted, a memory
window at segment D000 will be used.
Cclock specifies the multiple of the standard frequency for the UART clock. Valid
values for clock are 1 or 8. A value of 1 yields a clock frequency of 1.8432
MHz; a value of 8 yields 14.7456 MHz. If this option is omitted, the
standard clock frequency will be used.
Before removing a DSP-100 from its PCMCIA socket, the Enabler should be executed to
free the system resources allocated when the card was installed. For this operation the
Enabler provides on additional command line option:
R instructs the enabler to release the resources previously allocated to the
DSP-100. When the 'R' option is used, any settings specified by the 'B' and 'I'
options are ignored.
2.2.1.1 Example 1
DSP130EN.EXE
In example 1, no command line argument is specified. The Enabler will report an error
and display the proper usage of the command.
2.2.1.2 Example 2
DSP130EN.EXE (s0,b300,i5)
In example 2, the Enabler will configure the DSP-100 in socket 0 with a base address of
300H and IRQ 5 using a configuration memory window at segment D000.
2.2.1.3 Example 3
DSP130EN.EXE (i10,h,b340,s1)
In example 3, the Enabler will configure the DSP-100 in socket 1 with a base address of
340H and IRQ 10 using a configuration memory window at segment D000.
2.2.1.4 Example 4
DSP130EN.EXE (s0,b300,i3,wd8)
In example 4, the Enabler will configure the DSP-100 in socket 0 with a base address of
300H and IRQ 3 using a configuration memory window at segment D800.
2-9 DSP-100 (Rev. G and later) User’s Manual
www.bb-elec.com orders@bb-elec.com support@bb-elec.com
International Office: 707 Dayton Road PO Box 1040 Ottawa, IL 61350 USA 815-433-5100 Fax 433-5104
European Office: Westlink Commercial Park Oranmore Co. Galway Ireland +353 91 792444 Fax +353 91 792445