User`s manual

6.1.2 Auxiliary Channel: Handshaking Disabled.
The DSP-200/300 ports may be configured so that the RTS-CTS handshake is disabled.
This is the default configuration. In this configuration, RTS and CTS from the 16C750
UART will be looped back to each other. In addition, the auxiliary output and input
signals will be looped back to each other. This configuration is shown below:
RS-422/485
+
+
+
+
-
-
-
-
16C550
UART
DATA OUT
DATA IN
AUX OUT
AUX IN
TXD
RXD
-RTS
-CTS
Drivers/Receivers
Driver
Receiver
Driver
Receiver
Figure 10. Auxiliary Channel Handshaking Disabled
6-2 DSP-200/300 (Rev. I and later) User's Manual
www.bb-elec.com [e-mail] [e-mail]
International Office: 707 Dayton Road PO Box 1040 Ottawa, IL 61350 USA 815-433-5100 Fax [phone]
European Office: Westlink Commercial Park Oranmore Co. Galway Ireland [phone] Fax [phone]