User`s manual

8. Windows 2000/XP should have chosen an available Interrupt Request
setting automatically when the I/O address range was configured by a Basic
Configuration selection. This default Interrupt Request setting should not
need changed as long as "No conflicts" is displayed in the bottom display
region titled Conflicting Device List. If you are satisfied with Windows
2000/XP selection then skip the next step.
4-13 DSP-200/300 (Rev. I and later) User's Manual
www.bb-elec.com [e-mail] [e-mail]
International Office: 707 Dayton Road PO Box 1040 Ottawa, IL 61350 USA 815-433-5100 Fax [phone]
European Office: Westlink Commercial Park Oranmore Co. Galway Ireland [phone] Fax [phone]