Specifications

Tritech International Ltd SeaKing System Options OM
Issue 3 TIL – Eng – Spec – 040 Page 32 of 44
'Mean Seabed' Output String Format
In Version 1.51 -> 1.53 software, there is only one string format supported and this replicates the
TSS Altimeter output. Upon request, further data formats may be inserted and these will be
selectable within the SONV3SO.INI file (see earlier).
1. TSS Altimeter String Format
Rxx.xx<cr><lf>
Where;
R = String Header Character
xx.xx = Mean Seabed Range in metres
<cr><lf> = String Terminator
N.B. "R00.00<cr><lf>" is output when there are no valid Profiler data points in Mean
calculation.