User`s guide

Troubleshooting
Page 72 AirborneDirect™ Serial Bridge User’s Guide 100-8006-152G
Quatech, Inc. Confidential
After changing the Bridge’s static
IP address, the ACC stops
responding.
Once the static IP address is changed and you click
Save, the Bridge switches to the new IP address and
loses connection with the ACC. To resolve this
problem, restart the ACC.
You used the ACC to change the
Bridge’s configuration settings, but
the new settings did not take
effect.
You may not have clicked the Save button on the ACC
page. Click this button after making your changes on
the page.
You tried to update the firmware,
but the new firmware did not take
effect.
You uploaded an incorrect file. Go to the Firmware
Update page and check the current level. Make sure
the one you will upload has a higher (later) revision
level (see the Firmware Update Page on page 53).
Repeat the procedure using the appropriate file.