User`s guide

Using VCOM
Page 64 AirborneDirect™ Serial Bridge User’s Guide 100-8006-152G
Quatech, Inc. Confidential
• We recommend that you install VCOM in the default destination folder. If you want to
select another location, click the Change button and select the location where you want
VCOM installed.
• Click the Next button. The Ready to Install the Program screen appears, showing the
selections you made in the previous screens (see Figure 34).
Figure 34. Ready to Install the Program Screen
• Review your selections to make sure they are correct. If you need to change them, click
the Back button until you return to the appropriate screen, make your change, and click
the Next button until you return to the Ready to Install the Program screen.
• Click Install. A screen appears as InstallShield installs NMS_VCOM (this may take several
minutes). After NMS_VCOM is installed, the InstallShield Wizard Completed screen
appears (see Figure 35).