User`s guide

Airborne Control Center
Page 50 AirborneDirect™ Serial Bridge User’s Guide 100-8006-152G
Quatech, Inc. Confidential
Table 9. Network Services Configuration Settings
Parameter Description
Enable UDAP When checked, enables Universal Data Appliance
Protocol (UDAP). This allows the Bridge to be
discovered from a LAN-based device that supports
the UDAP protocol.
Default is checked.
Telnet Port Port number of the Telnet server.
Default is 23.
Telnet Inactivity Timeout – seconds Number of seconds of inactivity that must occur for
the Telnet session to timeout.
Default is 60.
Serial Escape Mode Determines whether the Bridge looks for the escape
sequence in the data stream from the serial host and
reacts to it.
Default is On.
LAN Escape Mode Determines whether the Bridge looks for the escape
sequence in the data stream from a LAN-based
device and reacts to it.
Default is On.
Escape Sequence Defines the characters used as the escape
sequence.