User`s guide

Hardware Installation
Page 10 AirborneDirect™ Serial Bridge User’s Guide 100-8006-152G
Quatech, Inc. Confidential
ITEMS SUPPLIED BY THE USER
The following items, which are not included in the package contents, are also required:
 A serial client with at least one serial port. The serial client must be within the
transmit and receive range of the Access Point to be used with the Bridge.
 A LAN host running Microsoft
®
Windows
®
XP or Windows 2000.
 An IEEE 802.11b/g-compliant Access Point with DHCP enabled.
 Mounting hardware for the AirborneDirect™ Bridge cradle.
Note:
Other Access Points in the area may interfere with the Bridge’s ability to
associate with your chosen Access Point (the Bridge will try to associate with
the first available “best-quality” AP). If you encounter difficulties with connecting
to your chosen AP, either remove power from these Access Points or move to
an isolated location, and then perform the setup in Figure 1 on page 3.