User`s guide

WIRELESS

HITRON CGN USER’S GUIDE

Run WPS Use these buttons to run Wifi Protected Setup (WPS):

Click the PBC button to begin the Push-Button

Configuration process. You must then press the PBC

button on your client wireless devices within two

minutes in order to register them on your wireless

network.

Click the PIN button to begin the PIN configuration

process. In the screen that displays, enter the WPS

PIN that you want to use for the CGN, or the WPS

PIN of the client device you want to add to the

network.

Figure 30: WPS PIN

WPS Current Status This displays whether or not the CGN is using Wifi

Protected Setup.

WPS Configured This displays whether or not the CGN’s WPS is

configured.

WPS AP PIN This displays the WPS AP PIN configured.

Wireless Security

SSID Select the SSID for which you want to configure

security.

Table 27: The Wireless > WPS & Security Screen (continued)