User`s guide

WIRELESS

HITRON CGN USER’S GUIDE

7.4 THE WPS & SECURITY SCREEN

Use this screen to configure your CGN’s WPS & security settings. You can run WPS

and configure the wireless network’s SSID. You can also configure authentication

and encryption on your wireless network.

NOTE: It is strongly recommended that you set up security on your network;

otherwise, anyone in the radio coverage area can access your network.

Click Wireless > WPS & Security. The following screen displays.

Enable WIFI DHCP Use this field to turn the wireless network on or off.

Select ENABLE to turn the wireless network on.

Deselect DISABLE to turn the wireless network off.

Lease Time

This displays the time that elapses before your device’s

IP address lease expires, and a new IP address is

assigned to it by the DHCP server.

DHCP Start IP This displays the start IP address.

DHCP End IP This displays the end IP address.

Apply Click this to save your changes to the fields in this

screen.

Cancel Click this to return the fields in this screen to their last-

saved values without saving your changes.

Table 26: The Wireless > IP Setting (continued)