User`s guide

STATUS

HITRON CGN USER’S GUIDE

3.5 THE PASSWORD SCREEN

Use this screen to change the password with which you log in to the CGN.

NOTE: If you forget your password, you will need to reset the CGN to its factory

defaults.

Click Status > Password. The following screen displays.

SCDMA Mode This displays the Synchronous Code Division Multiple

Access (SCDMA) mode of each channel on which the

upstream signal is transmitted.

Signal Power (dBmV) This displays the transmitted power of the signal of each

upstream data channel to which the CGN is connected,

in dBmV (decibels above/below 1 millivolt).

Channel ID This displays the ID number of each channel on which

the upstream signal is transmitted.

Cable Modem IP Information

IP Address This displays the CGN’s WAN IP address. This IP

address is automatically assigned to the CGN

Subnet Mask This displays the CGN’s WAN subnet mask.

Gateway IP This displays the IP address of the device to which the

CGN is connected over the CABLE interface.

DHCP Lease Time This displays the time that elapses before your device’s

IP address lease expires, and a new IP address is

assigned to it by the DHCP server.

Table 9: The Status > CM Status Screen (continued)