User`s guide

INTRODUCTION

HITRON CGN USER’S GUIDE

When you turn on the CGN, the LEDs light up in the following order:

Power

US

DS

Status

The ETH 1~4 LEDs light up as soon as there is activity on the relevant port, and

the WIRELESS LED lights up once the wireless network is ready.

USB

WIRELESS

1.4 IP ADDRESS SETUP

Before you log into the CGN’s GUI, your computer’s IP address must be in the same

subnet as the CGN. This allows your computer to communicate with the CGN.

NOTE: See IP Addresses and Subnets on page 29 for background information.

The CGN has a built-in DHCP server that, when active, assigns IP addresses to

computers on the LAN. When the DHCP server is active, you can get an IP address

automatically. The DHCP server is active by default.

DS Green, blinking The CGN is searching for a downstream frequency

on the CABLE connection.

Green, steady The CGN has successfully located and locked onto

a downstream frequency on the CABLE

connection.

Blue, steady The CGN is engaged in channel bonding on the

downstream connection.

Off There is no downstream activity on the CABLE

connection.

Power Green Cable modem is plugged in to an electrical outlet

and is and receiving power

Off The CGN is not receiving power.

Table 3: LEDs