User`s guide

INTRODUCTION

HITRON CGN USER’S GUIDE

USB Off The CGN is not linked up USB.

Green, steady The CGN has successfully linked up USB.

LAN/ Front Off No device is connected to any LAN port.

Green, blinking A device is connected to the LAN port via a

Ethernet link, and is transmitting or receiving data.

Green, steady A device has successfully connected to the LAN

port via a Ethernet link.

LAN/ Back Off No device is connected to the relevant LAN port.

Orange, blinking A device is connected to the relevant LAN port via a

Fast Ethernet (10/100Mbps) link, and is transmitting

or receiving data.

Orange, steady A device is connected to the relevant LAN port via a

Fast Ethernet (10/100Mbps) link, but is not

transmitting or receiving data.

Green, blinking A device is connected to the relevant LAN port via a

Gigabit Ethernet (1000Mbps) link, and is

transmitting or receiving data.

Green, steady A device is connected to the relevant LAN port via a

Gigabit Ethernet (1000Mbps) link, but is not

transmitting or receiving data.

Status Green, Blinking The CGN’s cable modem is registering with the

service provider’s CMTS.

Green The CGN’s cable modem has successfully

registered with the service provider and is ready for

data transfer.

US Green, blinking The CGN is searching for an upstream frequency

on the CABLE connection.

Green, steady The CGN has successfully located and locked onto

an upstream frequency on the CABLE connection.

Blue, steady The CGN is engaged in channel bonding on the

upstream connection.

Off There is no upstream activity on the CABLE

connection.

Table 3: LEDs