Specifications


Compact RDMS
TM
Telemetry Receiver

39 Quasonix, Inc.
12 Appendix C – Detailed Output Control (OC) Command Settings
The Output Control command, as described in Table 6, is used to report or set the channel source values.
Note: The state settings use the alpha O, not a number zero (0).
Mnemonic Name Description
OC ? Help Message Displays abbreviated list of available commands
OC Current Settings (This is an example - current settings will vary.)
O_0 = CLK_I0
O_1 = DATA_I0
O_2 = CLK_Q0
O_3 = DATA_Q0
O_4 = CLK_I1
O_5 = DATA_I1
O_6 = CLK_Q1
O_7 = DATA_Q1
OC D Set Default Outputs O_0 = CLK_I0
O_1 = DATA_I0
O_2 = CLK_Q0
O_3 = DATA_Q0
O_4 = CLK_I1
O_5 = DATA_I1
O_6 = CLK_Q1
O_7 = DATA_Q1