Specifications


Compact RDMS
TM
Telemetry Receiver

37 Quasonix, Inc.
11 Appendix B – Pinouts for Optional 37 Pin Connector
The optional 37-pin connector provides three sets of clock and data, two high-speed analog outputs, and one low-
speed analog output. Pin numbering for the optional connector is shown in Figure 13. Pin assignments are listed in
Table 10.
Figure 13: Optional 37-Pin Numbers
Table 10: Optional 37-Pin Assignments
Position Signal Description
1 DAC A Analog output (+/- 5VDC)
2 DAC B Analog output (+/- 5VDC)
3 RSSI Received Signal Strength Indication (0-3.3VDC)
4 Data C + Clock and Data pairs
5 DNC Factory use only – Do Not Connect
6 DNC Factory use only – Do Not Connect
7 +28 VDC In System power
8 Ground System power
9 Ground System power
10 Clock A + Clock and Data pairs
11 Data A + Clock and Data pairs
12 Serial Ground RS232 Serial Connection - Ground
13 Lock Detect LVTTL Indicator Line
14 Serial TXD RS232 Serial Connection - Transmit
15 Clock C + Clock and Data pairs
16 Clock B + Clock and Data pairs
17 Data B + Clock and Data pairs
18 DNC Factory use only – Do Not Connect
19 DNC Factory use only – Do Not Connect