Specifications


Compact RDMS
TM
Telemetry Receiver

7 Quasonix, Inc.
4.3.1 Tier 0 (PCM/FM), Tier I (SOQPSK-TG), and Tier II (Multi-h CPM) Commands
The following table describes all receiver user commands. Listed are the command code, name, description of the
command, whether specific options must be ordered or the command is standard on all receivers, basic or advanced
command, and whether the command is restricted to specific waveform modes.
Note: If a user issues a command that does not apply to a given mode, an "Invalid Command" message is displayed.
Any command that is valid in a mode but is disabled due to the option not being installed, returns an "Option Not
Installed" message.
Table 6: Standard and Optional User Commands
Mnemonic Name Description Option (s)
Required
Basic or
Advanced
Command
Mode
Restriction
? Help Message
Displays abbreviated list of
available commands
Standard Basic None
AD
Downconvert
Antenna
AD Report the
downconvert antenna state
AD 0 Set downconvert
antenna state to OFF
(Disabled)
AD 1 Set downconvert
antenna state to ON
(Enabled)
**Downconverting antenna
control only available when
using a 5-band
downconverter AND P and C
bands are available on the
unit. (applies to customers
using downconverting
antennas for C-band)
**Standard Basic None
AE AGC Enable
Enable or Disable Automatic
Gain Control (AGC)
Examples:
AE Report AGC state
AE 0 Set AGC state to
OFF (Disabled)
AE 1 Set AGC state to ON
(Enabled)
Standard Basic None