Installation guide

Quasar CM-4251 Series User and Installation Guide

Triggered Action

The Administrator can specify various alarm actions to be taken when an alarm is triggered. The

options are listed below.

 Enable alarm output – Select this box to enable alarm relay output.

 Record stream to sd card – Select this box in order to save the alarm-triggered recording to

your microSD/SDHC card. Enter the number of seconds for the pre-trigger buffer. Select the

first radial button if you wish to upload for a specified length of time and enter the number

of seconds. Alternatively, select the second radial button to upload during the active trigger.

See Figure 53: Application – Record Stream to SD Card.

Figure 53: Application – Record Stream to SD Card

Note:

Make sure that local recording (with a microSD/SDHC card) is activated so that this

function can be implemented. See Recording for further details.

 Send Message by FTP/E-Mail – Select whether to send an alarm message by FTP and/or

e-mail when an alarm is triggered.